Curb Stop Key (Slender Head)
Part #Stock SizeLengthWeight/lbs 600-485/8″48″5.5600-605/8″60″6.5600-725/8″72″7.5600-965/8″96″9.5600-1205/8″120″11.75600-1445/8″144″13.75
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 600-48 | 5/8" | 48" | 5.5 |
| 600-60 | 5/8" | 60" | 6.5 |
| 600-72 | 5/8" | 72" | 7.5 |
| 600-96 | 5/8" | 96" | 9.5 |
| 600-120 | 5/8" | 120" | 11.75 |
| 600-144 | 5/8" | 144" | 13.75 |
- Precision machined, slender head with slightly tapered jaw designed to operate offset valves or valves near to the inside wall of the curb box.
Curb Stop Key (Mud-Cutter Head)
Part #Stock SizeLengthWeight/lbs 601-485/8″48″5.5601-605/8″60″6.5601-725/8″72″7.5601-965/8″96″9.5601-1205/8″120″11.75601-1445/8″144″13.75
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 601-48 | 5/8" | 48" | 5.5 |
| 601-60 | 5/8" | 60" | 6.5 |
| 601-72 | 5/8" | 72" | 7.5 |
| 601-96 | 5/8" | 96" | 9.5 |
| 601-120 | 5/8" | 120" | 11.75 |
| 601-144 | 5/8" | 144" | 13.75 |
- Precision machined head with ‘duck-billed’ jaws for easy-on. Interior wedge designed to push dirt and mud away from the top of the valve, potentially allowing for it’s operation without costly excavation.
Main Valve Key
Part #Stock SizeLengthWeight/lbs 602-481.050″48″7602-601.050″60″8.25602-721.050″72″9.25602-961.050″96″11.5602-1201.050″120″14602-1441.050″144″16
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 602-48 | 1.050" | 48" | 7 |
| 602-60 | 1.050" | 60" | 8.25 |
| 602-72 | 1.050" | 72" | 9.25 |
| 602-96 | 1.050" | 96" | 11.5 |
| 602-120 | 1.050" | 120" | 14 |
| 602-144 | 1.050" | 144" | 16 |
- Stress-relieved welds. Handle and shaft made from Schedule 80 pipe. Steel head with large mud vents.
Manhole Hook with Inline Handle
Part #Stock SizeLengthWeight/lbs 382B5/8″18″2.75382C5/8″24″3.2382D5/8″36″4.5382E*5/8″24″3.5382F*5/8″36″4.5
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 382B | 5/8" | 18" | 2.75 |
| 382C | 5/8" | 24" | 3.2 |
| 382D | 5/8" | 36" | 4.5 |
| 382E* | 5/8" | 24" | 3.5 |
| 382F* | 5/8" | 36" | 4.5 |
- High Carbon Hex Steel
- Wedge Tip
Chain Hook with Offset Handle
Part #Stock SizeLengthWeight/lbs 3825/8″30″4
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 382 | 5/8" | 30" | 4 |
- High Carbon Hex Steel
- Chisel Tip
Pinch Point Crowbar
Part #Stock SizeLengthWeight/lbs 215-061-1/8″36″6215-101-1/8″48″10215-121-1/8″51″12215-141-1/8″54″14215-181-1/4″60″18215-221-3/8″64″22215-261-1/2″66″26
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 215-06 | 1-1/8" | 36" | 6 |
| 215-10 | 1-1/8" | 48" | 10 |
| 215-12 | 1-1/8" | 51" | 12 |
| 215-14 | 1-1/8" | 54" | 14 |
| 215-18 | 1-1/4" | 60" | 18 |
| 215-22 | 1-3/8" | 64" | 22 |
| 215-26 | 1-1/2" | 66" | 26 |
Telegraph Digging Bar
Part #Stock SizeLengthWeight/lbs 2161-1/8″96″282171″72″17217S1-1/8″72″21
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 216 | 1-1/8" | 96" | 28 |
| 217 | 1" | 72" | 17 |
| 217S | 1-1/8" | 72" | 21 |
- High Carbon Hex Steel
- One Chisel End & One Pencil Point End
Tamper Top Post Hole Digger
Part #Stock SizeLengthWeight/lbs 1971″70-1/2″15
| Part # | Stock Size | Length | Weight/lbs |
|---|---|---|---|
| 197 | 1" | 70-1/2" | 15 |
- Standard Blade Size: 2-1/2" x 8-1/2"
- Standard Head Size: 2-1/4"
- Available in Any Length
Tamper with Steel Handle
Part #BaseHeightWeight/lbs 1958″ x 8″44″1519610″ x 10″44″20
| Part # | Base | Height | Weight/lbs |
|---|---|---|---|
| 195 | 8" x 8" | 44" | 15 |
| 196 | 10" x 10" | 44" | 20 |
Offset Irons
Part #SizeWeight/lbs 010* *left5/8″ x 10″ x 3/16″0.75011* *right5/8″ x 10″ x 3/16″0.75
| Part # | Size | Weight/lbs |
|---|---|---|
| 010* *left | 5/8" x 10" x 3/16" | 0.75 |
| 011* *right | 5/8" x 10" x 3/16" | 0.75 |
Stub Irons
Part #SizeWeight/lbs 014* *inside5/8″ x 4-1/2″ x 1/8″0.42015* *outside5/8″ x 4-1/2″ x 1/8″0.42
| Part # | Size | Weight/lbs |
|---|---|---|
| 014* *inside | 5/8" x 4-1/2" x 1/8" | 0.42 |
| 015* *outside | 5/8" x 4-1/2" x 1/8" | 0.42 |